Believe that many people will have such an awkward energy, the key inserted the wrong door lock, the chaos to pull out unexpectedly broke, half shut in the door lock, so what should be? Many people will go to the locksmith, and the most direct way to do this is to ask the master to handle it, but there is a more convenient way to do it, you know? Today let the key manufacturer say the key break how to do.
1. If the key is broken in front of the keyhole, of course it must be flat, then use an unlocked single hook to deeply break the top of the key and then use it to pull it out.
2. If not to flush to the keyhole mouth off key, but the extra part, but I still can't use long nose pliers or tweezers and draw it out, then you can use a small screwdriver or fine steel wire line, drag the key pulled toward the outside, and then drag to use tweezers or little needle nose pliers to clip, then can be pulled out. If it's not too good, you can put oil in the broken key or use a lubricant, and then pull it out as described above.
3. Also some families use the cross lock, lock cross is relatively difficult to get some, but we can use a small electric drill to install a small bit of 2 cm, and then in the space space broken cross key drill it, and then put a piece of wire in, of course, on the wire to stick on 502 glue and then inserted into the newly drilled holes, such as 10 minutes, pull the keys is likely to come out.
Master, of course, if the locksmith is almost completely can wait for the teacher to take measures, so it is sometimes should pay attention to see if the key while opening the door and door opening match well, the key of quality is also very important, when it's lock on the attention to the quality of the observation keys oh, jinhua hongda key co., LTD., the key to the production quality, novel design, have need keys, plastic keys, plastic key can inquire.
